Suzhou Chaoyang Reaction Kettle Co.,LtdSuzhou Chaoyang Reaction Kettle Co.,Ltd
CONTACT US
Fax: 1804231331
Tel: 0512-558176
E-MAIL: service@shyjjm.com

Considerations for autoclave operation

Autoclave is magnetic driving device applied to the typical large response equipment innovation, it solved before packing seal, mechanical seal shaft seal leakage problems that cannot be overcome, without any leakage and pollution, is currently the most ideal device to chemical reactions under high temperature and high pressure, especially inflammable, explosive and toxic media reaction, showed its superiority. Kettle body surface to polishing requirements, Mirror-polished level that can be achieved, and for high viscosity material processed into a cone-shaped bottom for easy feeding and cleaning.
1
 
considerations). autoclave to be used at designated sites, and operate in accordance with the instructions for use.   
2). identification of the main vessel on the test pressure, working pressure and high temperature conditions, within the range allowed for which you want to use.
3). of pressure on pressure gauge used, preferably in its indicated pressure is less than 1/2.    And compared with the standard pressure gauge pressure gauge, corrected.   
4). pressure gauges for oxygen, to avoid mixing with other gases with pressure gauge.   
5). relief valve and other safety devices, through regular checks in accordance with the requirements of device you want to use.   
6). operation it must be noted that accurate thermometer insert into reactions in solution.   
7). inside the autoclave and liner parts should be kept clean.  
8). cover flange when the lid is on, to bolt located on the diagonal, couples in turn also tightened.
9). measuring instruments broke open, mostly on the sides of the glass surface before and after the break. Therefore, when not standing in these dangerous places. When risk is expected to occur, and to remove the glass and put on the new.

 

BACK